Sorry, your browser doesn't support Java. Sorry, your browser doesn't support Java.

Knight Hawk Supply
Your One-Stop Hydraulic Source
Fulflo FV2000 Series Valve
Hydraulic Valves
Your One-Stop Source for Fulflo Valves
Fulflo V Series Valve
Fulflo V Series Valves
Standard with Screw Connections Standard with Flange Connections Stainless Steel with Screw Connections Handwheel with Screw Connections Handwheel with Flange Connections
APPLICATION
The Fulflo “V” Series range in size from 1/4” through 2” and operate efficiently with liquids of any viscosity at pressures from 2 to 1000 P.S.I. The “V” series valves are available in flange or screw type...cartridge or handwheel in a choice of brass, cast iron, steel and stainless steel. Widely used in a variety of applications, the “V” series valves are ideally suited in hydraulic and lubricating systems for load regulation and system protection. Special trim or packings are available for use with fire resisting fluids and other liquids of this type.
INSTALLATION
Fulflo valves can be mounted in any position. A tee may be inserted in the pump discharge line to mount the valve. The correct size of valve should be installed, preferably matching the pump discharge line. Screw the valve into the nipple in the tee, or in the case of the flange style, bolt the valve to the companion flange screwed into the nipple. When the valve is used for frequent bypassing of oil pressure, its outlet should be piped back to the tank. Care must be taken to have the discharge well below the oil level in the tank to prevent air entrainment and erratic operation. Only if the valve is used as safety or overload relief and operates infrequently may its discharge be piped back into the pump suction line. Frequent or continuous operation under these conditions will cause excessive heating of the oil and possible damage.
Fulflo Valves
ASSEMBLY NUMBER IDENTIFICATION CHART
Fulflo Assembly Number Identification
EXAMPLES:
V
J
-1
RV
SP
/HS
WS
Series
Cast Iron
1/4"
Viton O-Ring
Steel Parts
HS Piston
WS Spring
V
J
F
-5
R
/HS
WS
Series
Cast Iron
Flanged
1"
Buna O-Ring
H.S. Piston
WS Spring
V
J
F
-5
-150
A
R
/HS
WS
Series
Cast Iron
Flanged
1"
Rating
Style
Buna O-Ring
H.S. Piston
WS Spring
NOTE: Stainless steel pistons are supplied on brass valves, unless hardened steel is specified. Hardened steel pistons are supplied on cast iron or steel unless stainless steel is specified. Buna O-Rings are supplied as standard unless other material is specified.
Fulflo Valves
STANDARD PRESSURE RANGE CHART
Fulflo Pressure Ranges
Fulflo Valves
VJ Cast Iron VB Brass VS Steel VSS Stainless Steel VJ-SP Cast Iron With Steel Parts
Fulflo Drawing and Parts List
Fulflo Valves
Fulflo Drawing and Parts List
Fulflo Valves
Fulflo Drawing and Parts List
Fulflo Valves
Fulflo Drawing and Parts List
Fulflo Valves Call, Fax or Email Knight Hawk Supply for more information on
Fulflo Valves
Fulflo Valves
Knight Hawk Supply
89 Zips Road
Hawk Point, MO 63349
(636) 338-4031 Fax (636) 338-4434
Toll Free (877) 739-3200
© 2004-2005 Copyright Knight Hawk Supply, Inc.
All Rights Reserved