Knight Hawk Supply
Your One-Stop Hydraulic Source
PH and PA Series Electronic Stroke Position Hydraulic and Pneumatic Cylinders

JIT "PH" and "PA" Actuators are state of the art in transducer technology

Strokes to 120 inches

Bores 2" to 30"

Repeatability to +/- .001%

Non-contact transducer - no parts to wear out

Analog or digital position output

Unit flushed and certified to NAS-1638 particulate count class 4

Single source responsibility for cylinder, valve and feedback devices

Linearity less than .05% full stroke minimum of +/- .0001

Power interruption does not cause loss of position

Straight thread O-ring ports for "No Leak" pressure and return hydraulic connections

Electrical connectors mate with Analog MS3106A14S or Digital MS3116F12-10S connector series

If you need an electronic feedback linear position cylinder with servo valve, 5-40 GPM with Digital or Analog absolute transducer, this is the cylinder you need

Call, Fax or Email Knight Hawk Supply for more information on JIT Electronic Stroke Position Cylinders